- Products (37)
- All (37)
Related Categories: Pond Filters Uv Light | Gasket | Strainer Basket | Allclear G1 | Plug | Pressurized Filters | Pondmaster | Pump Cover
O Ring
-
The Pond Guy® AllClear™ Plus G1 Filter Top O-Ring
Replacement Filter Top O-Ring for the AllClear™ Plus G1 3600 & 4800. The Filter Top O-Ring will fit both models and should be replaced whenever the original O-Ring becomes too dry cracked or worn.Read More »$14.99 -
Sequence® Strainer Basket Replacement Drain Plugs & O-Rings
Replacement parts for the Sequence Waterways 90 Cubic Inch and Advantage 500 Cubic Inch Strainer Baskets. The 2 Inch O-Ring Gasket provides a watertight seal to the strainer basket lid. The replacement drain plugs and drain plus o-rings attaches to the side of the unit.Read More »$3.00 - 69.99 -
Replacement O-Ring For 3/4 Airline Cap
Replaces the O-Ring in the Airmax® Winterization SW/SWHP/PS - 3/4 Cap. The 3/4 yellow vinyl washer seals the winterization airline cap to keep debris from entering during the winter. For Airmax® Shallow Water Series™ Shallow Water HP Series™ and PondSeries™ Aeration…Read More »$0.29 -
Alpine™ Cyclone™ Pump - O-Rings
Replacement O-Ring that sits between the pump body and impeller in the Alpine Cyclone Pumps. Alpine O-Ring PAL2131-OR fits the Cyclone 2100 - 31000 GPH pump models: PAL2100 and PAL3100 while Alpine O-Ring PAL4568-OR fits the Cyclone 4000 - 8000 GPH pump models: PAL4000 PAL5200 PAL6550 and PAL8000.Read More »$9.99 - 16.99 -
The Pond Guy® AllClear™ G2 Filter - Replacement Gasket Kit
The Gasket Kit is designed for The Pond Guy® AllClear™ G2 Models: 2000 3500 & 4500 Pressurized Filters. This kit includes all of the o-rings you need from the canister filter to the tube fittings to ensure a water tight seal during operation.Read More »$39.99 -
The Pond Guy® ClearSolution™ G2 Replacement Quartz Sleeve O-Ring
Replacement O-Ring for the The Pond Guy® ClearSolution™ G2 pond filter system. The O-Ring is placed on the quartz sleeve before locking it into place with the tension nut and screw to prevent water from coming in contact with the UV bulb.Read More »$1.99 -
The Pond Guy® AllClear™ G1 Filter Top O-Ring
Replacement Filter Top O-Ring for the AllClear™ G1 Pressurized Filters. The Filter Top O-Ring will should be replaced whenever the original becomes too dry cracked or worn. For models 1200 2400 and 3600.Read More »$9.99 - 14.99 -
The Pond Guy® AquaStream™ Discharge Horn O-Ring
Replacement part for The Pond Guy® AquaStream™ ½ HP Fountain. Located in between the float mount ring and motor of the AquaStream™ ½ HP Fountain.Read More »$1.99 -
The Pond Guy® AquaStream™ Power Cord Female End Cap O-Ring
Replacement part for The Pond Guy® AquaStream™ ½ HP Fountain and The Pond Guy® LED Fountain Light Kits. Located at the end of the power cord female end caps for a tight fit.Read More »$1.69 -
The Pond Guy® SimplyClear™ Replacement Canister O-Ring
Replacement Canister O-Ring for The Pond Guy® SimplyClear™ 1250 Pressurized Filtration System. This Canister O-Ring creates a water-tight seal when placed between the filter canister and transformer cover.Read More »$6.99 -
The Pond Guy® ClearSolution™ G1 O-Ring Kit
Replacement O-Ring Kit for The Pond Guy ClearSolution G1 Filter. Four O-rings are included with this kit: (1) Quartz Sleeve O-Ring (1) UV O-Ring (1) UV Cap O-Ring and (1) Pump O-Ring.Read More »$4.99 -
The Pond Guy® O-Ring for UV Transformer
Replacement O-Ring for The Pond Guy® UV Transformers. This replacement O-Ring will fit all models of The Pond Guy® PowerUV™ UV Clarifiers AllClear™ & AllClear™ Plus G1 Pressurized Filters.Read More »$1.49
Site Search by
